| VIDEO |
| Video Resolution | Up to 8K 60Hz 4:2:0/8K 30Hz 4:4:4/4k 120Hz |
| HDR Formats | 420, 422, 444 (10 AND 12 DEEP COLOR) HDR10, HDR10+, DOLBY VISION, HLG |
| Color Space | YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500) |
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 Supported |
| Deep Colour | Up to 16 bit |
| Scaling | By-pass or AUTO Scale & 8k to 8k or 4k, 4k to 1080p |
| AUDIO |
| HDMI Audio | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos |
| COAX | LPCM up to 5.1 96KHz 24 Bit, Dolby Digital 5.1, DTS HiRes Audio |
| Analog (Balanced) | PCM 2.0 CH |
| Analog ( on RCA) | PCM 2.0 CH |
| HDCP |
| HDCP Management | Input: HDCP 2.3 and backward compatible |
| Output: Manageable (Default follow the display). For example: it will output HDCP 1.4 when source is HDCP 2.3 or 2.2 when connect to HDCP 1.4 display. It will turn off HDCP if display does not support HDCP. |
| Can turn off HDCP by DIP switch compulsory |
| Downscale Capability | 1: “By-PASS” status: it will pass through whatever from inputs to outputs without any processing |
| 2: “AUTO” Status, rules as below: 2.1 : If the source is 8K, the displayer Max supports 4K, it will downscale to 4K; 2.2 : If the source is 4K, the displayer Max supports 1080p, it will downscale to 1080p; 3: Scale limitation 3.1 : Both outputs will downscale to SAME resolution if 2 outputs on both “AUTO” mode, CAN’T do different resolution on output; 3.2 : Can’t downscale from 8K to 1080p, If the source is 8K, but the displayers, Max supports 1080p, it will have black screen; But, if the source is 4K, the displayers, max support 1080p, it will output 1080p; 3.3 : Can’t support 720p or lower resolutions. |
| EDID Management | Provided when project starts |
| USB | The firmware can be updated |
